Inner diameter: 85 mm
Outer diameter: 93 mm
Cross section = 4 mm
Quantity: 5 Pcs
Fluororubber has excellent resistance to chemicals, acids and fuel as well as high temperature.
The temperature range for this material is 5 degree Fahrenheit to 400 degree Fahrenheit (-15 degrees Celsius to 204 degrees Celsius).
Please check our store for other sizes. If you cannot find what you need in the store, please do not hesitate to contact us at anytime.
Please note that the product picture is for reference purposes only and may not depict the exact item and size you are purchasing.
If you have any questions, please do not hesitate to contact us at anytime.

12# - 40 Unified Right Hand Thread Die
10 x 19 x 5mm Stainless Steel Ball Bearing Rubber Seals 2Pcs
10# - 36 Unified Right Hand Thread Die
11/16" - 12 Unified Right Hand Thread Die
10# - 24 Unified Right Hand Thread Die
13/16" - 12 Unified Right Hand Thread Die
11/16" - 28 Unified Right Hand Thread Die
11/16" - 32 Unified Right Hand Thread Die
10# - 28 Unified Right Hand Thread Die
3.7mm M35 HSS Cobalt Straight Shank Spiral Reamer H7
18.8 x 60 x 100mm Solid Carbide Drill Bit for hard material
18.2mm MT2 Shank Carbide Tip Morse Taper Shank Drill Bit
19 x 60 x 100mm Solid Carbide Drill Bit for hard material
17.7mm 1/2" Reduced Shank HSS Twist Drill Bit
17.9mm 1/2" Reduced Shank HSS Twist Drill Bit
18.9 x 60 x 100mm Solid Carbide Drill Bit for hard material
10V2-28 Tyre Valve Thread Die
M1.5 Module Bevel Gear Cutter No.6
Cutting Diameter 16mm Overall Length 92mm 2 Flute HSS-AL End Mill Cutt
Cutting Diameter 17mm Overall Length 123mm 4 Flute HSS-AL End Mill Cut
DP12 Gear Cutter No.3
M1.75 Module Bevel Gear Cutter No.4
Cutting Diameter 14.5mm Overall Length 92mm 2 Flute HSS-AL End Mill Cu
Cutting Diameter 26mm Overall Length 121mm 2 Flute HSS-AL End Mill Cut
2.53mm HSS Left hand Micro Drills 10 Pcs
60 x 20 mm T Slot Cutter Carbide Tip
19mm MT2 Morse Taper Shank Drill Bit
Cutting Diameter 4mm Overall Length 63mm 4 Flute HSS-AL End Mill Cutte
19.8mm 1/2" Reduced Shank HSS Twist Drill Bit
15.4mm 1/2" Reduced Shank HSS Twist Drill Bit
16 x 40 x 80mm Solid Carbide Drill Bit for hard material
Cutting Diameter 24mm Overall Length 121mm 2 Flute HSS-AL End Mill Cut 


Reviews
There are no reviews yet.